HRN EN 10083-1:2009
Čelici za poboljšavanje -- 1. dio: Opći tehnički uvjeti za isporuku (EN 10083-1:2006)
| Oznaka: | HRN EN 10083-1:2009 |
| Naslov (HR): | Čelici za poboljšavanje -- 1. dio: Opći tehnički uvjeti za isporuku (EN 10083-1:2006) |
| Naslov (EN): | Steels for quenching and tempering -- Part 1: General technical delivery conditions (EN 10083-1:2006) |
| Područje primjene (EN): | This part of EN 10083 specifies the general technical delivery requirements for semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3), bars (see NOTE 2), rod, wide flats, hot-rolled strip and sheet/plate, forgings (see NOTE 2) manufactured from the direct hardening non alloy steels for quenching and tempering (see EN 10083-2), the direct hardening alloy steels for quenching and tempering (see EN 10083-3), the non alloy flame and induction hardening steels (see EN 10083-2) and the alloy flame and induction hardening steels (see EN 10083-3), and supplied in one of the heat treatment conditions given for the different types of products in the relevant tables of EN 10083-2 and EN 10083-3 and in one of the surface conditions given in the relevant tables of EN 10083-2 and EN 10083-3. The steels are generally intended for the manufacture of quenched and tempered, flame or induction hardened machine parts, but can also be used in the normalized condition (see EN 10083-2). Where applicable, the requirements for mechanical properties given in EN 10083-2 and EN 10083-3 are restricted to the relevant tables in these documents. NOTE 1 European Standards on similar grades are listed in Annex C. NOTE 2 Hammer forged semi-finished products (blooms, billets, slabs etc.), seamless rolled rings and hammer forged bars are in the following covered under semi-finished products or bars and not under the term forgings. NOTE 3 Special agreements should be made when ordering un-worked continuously cast semi-finished products. NOTE 4 In accordance with EN 10020, the steels covered by EN 10083-2:2006 are quality and special steels, the steels covered by EN 10083-3:2006 are special steels. The differences between quality and special steels are characterized by the following requirements, which are valid for special steels only: the minimum impact values in the quenched and tempered condition (for non alloy special steels in the case of |
| Izdanje: | 2 |
| ICS: | 77.140.10 Toplinski obradivi čelici |
| Tehnički odbor/pododbor: | TO 503, Metalni materijali |
| Oznaka faze: | 95.99 - povlačenje HRN |
| Glasilo (rasprava): | HZN Glasilo 3/2009 () |
| Glasilo (objava): | HZN Glasilo 4/2009 () |
| Glasilo (ispravak): | HZN Glasilo 5/2009 () |
| Glasilo (povlačenje): | HZN e-Glasilo 10/2018 () |
| Način prihvaćanja: | pr - prihvaćanje strane norme u izvorniku |
| Cijena #1: | Cijena: 41,00 € | Jezik: en | Cjenovni razred: G | Broj stranica: 26 |
| Izvornik: | EN 10083-1:2006 |
| Zamjenjuje: | HRN EN 10083-1:2000 |
| Zamjenjena s: | HRN EN ISO 683-1:2018 |
Obrazac za naručivanje normativnih dokumenata i/ili publikacija (obrazac ob.025-2):