HRN EN 10149-2:2014
Toplo valjani plosnati proizvodi od čelika s visokom granicom razvlačenja za hladno oblikovanje -- 2. dio: Uvjeti isporuke za termomehanički valjane čelike (EN 10149-2:2013)
| Oznaka: | HRN EN 10149-2:2014 |
| Naslov (HR): | Toplo valjani plosnati proizvodi od čelika s visokom granicom razvlačenja za hladno oblikovanje -- 2. dio: Uvjeti isporuke za termomehanički valjane čelike (EN 10149-2:2013) |
| Naslov (EN): | Hot rolled flat products made of high yield strength steels for cold forming -- Part 2: Technical delivery conditions for thermomechanically rolled steels (EN 10149-2:2013) |
| Područje primjene (EN): | This European Standard, in addition to EN 10149-1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming. The grades are given in Table 1 (chemical composition) and Table 2 (mechanical properties) and are supplied in the thermomechanically rolled delivery condition as given in 7.2. The steels specified in this European Standard are applicable to hot-rolled flat products in the thickness range of: - 1,5 mm to 20 mm for the steels which have a specified minimum yield strength of 315 MPa ) up to and including 460 MPa1); - 1,5 mm to 16 mm for the steels which have a specified minimum yield strength of 500 MPa1) up to and including 700 MPa1); and - from 2 mm up to 10 mm for the steels with a minimum yield stress in the range from 900 MPa1) to 960 MPa1). |
| Izdanje: | 2 |
| ICS: | 77.140.50 Proizvodi i poluproizvodi od plosnatog čelika |
| Tehnički odbor/pododbor: | TO 503, Metalni materijali |
| Oznaka faze: | 60.60 - HRN dostupan |
| Glasilo (rasprava): | HZN Glasilo 2/2011 () |
| Glasilo (objava): | HZN e-Glasilo 1/2014 () |
| Način prihvaćanja: | pr - prihvaćanje strane norme u izvorniku |
| Cijena #1: | Cijena: 29,00 € | Jezik: en | Cjenovni razred: D | Broj stranica: 14 |
| Izvornik: | EN 10149-2:2013 |
| Zamjenjuje: | HRN EN 10149-2:2007 |
Obrazac za naručivanje normativnih dokumenata i/ili publikacija (obrazac ob.025-2):