HRN EN 13598-2:2020
Plastični cijevni sustavi za netlačnu podzemnu odvodnju i kanalizaciju -- Neomekšani poli(vinil-klorid) (PVC-U), polipropilen (PP) i polietilen (PE) -- 2. dio: Specifikacije za kontrolna okna i kontrolne komore (EN 13598-2:2020)
| Oznaka: | HRN EN 13598-2:2020 |
| Naslov (HR): | Plastični cijevni sustavi za netlačnu podzemnu odvodnju i kanalizaciju -- Neomekšani poli(vinil-klorid) (PVC-U), polipropilen (PP) i polietilen (PE) -- 2. dio: Specifikacije za kontrolna okna i kontrolne komore (EN 13598-2:2020) |
| Naslov (EN): | Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Specifications for manholes and inspection chambers (EN 13598-2:2020) |
| Područje primjene (EN): | This document specifies the definitions and requirements for unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) manholes and inspection chambers intended for non-pressure underground drainage and sewerage systems up to a maximum depth of 6 m from ground level to the invert of the manhole or inspection chamber. This document covers manholes and inspection chambers, with bases having a flow channel, and their joints to the piping system. Manholes and inspection chambers are intended to be used in pedestrian or vehicular traffic areas outside the building structure. NOTE 1 The intended use in underground installation outside the building structure is reflected in the marking of products by the application area code U. NOTE 2 Products complying with this document can also be used in non-traffic areas. NOTE 3 Products complying with this standard can be installed in underground applications without additional static calculation. NOTE 4 Shallow chambers are specified in EN 13598-1 [1]. Manholes and inspection chambers complying with EN 13598-2 are made from a prescribed set of components that are manufactured from unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifier (PP-MD) or polyethylene (PE) and assembled together. NOTE 5 The complete manhole or inspection chamber assembly can also include items which are not covered by this document (for example near surface or surface components). NOTE 6 Manholes and inspection chambers can be supplied with covers, frame covers and gratings complying with the relevant part of EN 124 [2]. Manholes and inspection chambers complying with EN 13598-2 may be used for storm-water systems. Manhole and inspection chamber components can be manufactured by various methods e.g. extrusion, injection moulding, rotational moulding, low-pressure moulding or fabricated. NOTE 7 Manholes and inspection chambers can be site assembled from different components, but can also be manufactured as a single unit. NOTE 8 Manholes and inspection chambers can be subject to national regulations and / or local provisions. |
| Izdanje: | 3 |
| ICS: | 23.040.05 Cjevovodi i dijelovi za vanjske kanalizacijske sustave 23.040.20 Plastične cijevi 93.030 Vanjski kanalizacijski sustavi |
| Tehnički odbor/pododbor: | TO 138, Plastične cijevi, spojnice i ventili za prijenos tekućina |
| Oznaka faze: | 60.60 - HRN dostupan |
| Glasilo (rasprava): | HZN e-Glasilo 1/2019 () |
| Glasilo (objava): | HZN e-Glasilo 6/2020 () |
| Način prihvaćanja: | pr - prihvaćanje strane norme u izvorniku |
| Cijena #1: | Cijena: 45,00 € | Jezik: en | Cjenovni razred: H | Broj stranica: 35 |
| Izvornik: | EN 13598-2:2020 |
| Zamjenjuje: | HRN EN 13598-2:2016 |
Obrazac za naručivanje normativnih dokumenata i/ili publikacija (obrazac ob.025-2):