HRN EN 17176-1:2019
Plastični cijevni sustavi za opskrbu vodom i podzemnu i nadzemnu tlačnu odvodnju, kanalizaciju i navodnjavanje -- Orijentirani neomekšani poli(vinil-klorid) (PVC-O) -- 1. dio: Općenito (EN 17176-1:2019)
| Oznaka: | HRN EN 17176-1:2019 |
| Naslov (HR): | Plastični cijevni sustavi za opskrbu vodom i podzemnu i nadzemnu tlačnu odvodnju, kanalizaciju i navodnjavanje -- Orijentirani neomekšani poli(vinil-klorid) (PVC-O) -- 1. dio: Općenito (EN 17176-1:2019) |
| Naslov (EN): | Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure -- Oriented unplasticized poly(vinyl chloride) (PVC-O) -- Part 1: General (EN 17176-1:2019) |
| Područje primjene (EN): | This part of FprEN 17176 specifies the material characteristics of oriented unplasticized poly(vinyl chloride) (PVC-O) solid wall piping systems intended for water supply and for buried drainage, sewerage and irrigation under pressure or above-ground where protected from direct sunlight. In conjunction with FprEN 17176-2, FprCEN/TS 17176-3 and EN ISO 1452-3, it is applicable to PVC-O pipes, PVC-O fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following: a) water mains and services lines; b) conveyance of water for both outside and inside buildings; c) drainage, sewerage and treated waste water under pressure; d) irrigation under pressure. Joints constructed of other materials shall meet their own standards in addition to the fitness of purpose requirements specified in FprEN 17176-5. It is applicable to piping systems intended for the supply of water with a maximum allowable operating pressure (PFA) up to and including 25 bar . The piping system according to this document is intended for the conveyance of cold water up to and including 45 °C and especially in those applications where special performance requirements are needed, such as impact loads and pressure fluctuations. For temperatures between 25 °C and 45 °C, FprEN 17176-2:2018, Figure C.1 applies. NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. |
| Izdanje: | 1 |
| ICS: | 23.040.20 Plastične cijevi 23.040.45 Plastične spojnice |
| Tehnički odbor/pododbor: | TO 138, Plastične cijevi, spojnice i ventili za prijenos tekućina |
| Oznaka faze: | 60.60 - HRN dostupan |
| Glasilo (rasprava): | HZN e-Glasilo 11/2017 () |
| Glasilo (objava): | HZN e-Glasilo 5/2019 () |
| Način prihvaćanja: | pr - prihvaćanje strane norme u izvorniku |
| Cijena #1: | Cijena: 29,00 € | Jezik: en | Cjenovni razred: D | Broj stranica: 15 |
| Izvornik: | EN 17176-1:2019 |
Obrazac za naručivanje normativnih dokumenata i/ili publikacija (obrazac ob.025-2):