HRN EN ISO 21305-1:2019
Plastika -- Polikarbonatni (PC) materijali za kalupljenje i ekstrudiranje -- 1. dio: Sustav označivanja i osnove za specifikacije (ISO 21305-1:2019; EN ISO 21305-1:2019)
| Oznaka: | HRN EN ISO 21305-1:2019 |
| Naslov (HR): | Plastika -- Polikarbonatni (PC) materijali za kalupljenje i ekstrudiranje -- 1. dio: Sustav označivanja i osnove za specifikacije (ISO 21305-1:2019; EN ISO 21305-1:2019) |
| Naslov (EN): | Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications (ISO 21305-1:2019; EN ISO 21305-1:2019) |
| Područje primjene (EN): | This document establishes a system of designation for polycarbonate (PC) moulding and extrusion materials, which can be used as the basis for specifications. The types of polycarbonate plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties: a) melt volume-flow rate; b) Charpy notched impact strength; and on information about the intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials. This document is applicable to all polycarbonate homopolymers and copolymers. It applies to unmodified materials ready for normal use and materials modified, for example, by colorants, additives, fillers, reinforcing materials, and polymer modifiers. It is not intended to imply that materials having the same designation give necessarily the same performance. This document does not provide engineering data, performance data or data on processing conditions which can be required to specify a material. If such additional properties are required, they are intended to be determined in accordance with the test methods specified ISO 21305-2, if suitable. In order to designate a thermoplastic material to meet particular specifications, the requirements are given in data block 5 (see 4.6). |
| Izdanje: | 1 |
| ICS: | 83.080.20 Plastomerni materijali |
| Tehnički odbor/pododbor: | TO 531, Plastika i guma |
| Oznaka faze: | 60.60 - HRN dostupan |
| Glasilo (rasprava): | HZN e-Glasilo 10/2017 () |
| Glasilo (objava): | HZN e-Glasilo 3/2019 () |
| Način prihvaćanja: | pr - prihvaćanje strane norme u izvorniku |
| Cijena #1: | Cijena: 25,00 € | Jezik: en | Cjenovni razred: C | Broj stranica: 10 |
| Izvornik: | EN ISO 21305-1:2019 |
| Zamjenjuje: | HRN EN ISO 7391-1:2008 |
Obrazac za naručivanje normativnih dokumenata i/ili publikacija (obrazac ob.025-2):