HRN EN ISO 2719:2016
Određivanje točke paljenja -- Metoda u zatvorenoj posudi po Pensky-Martensu (ISO 2719:2016; EN ISO 2719:2016)
| Oznaka: | HRN EN ISO 2719:2016 |
| Naslov (HR): | Određivanje točke paljenja -- Metoda u zatvorenoj posudi po Pensky-Martensu (ISO 2719:2016; EN ISO 2719:2016) |
| Naslov (EN): | Determination of flash point -- Pensky-Martens closed cup method (ISO 2719:2016; EN ISO 2719:2016) |
| Područje primjene (EN): | ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C. CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard. NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2]. Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C. Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of liquids with solids, liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A. Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751[13]. ISO 2719:2016 is not applicable to water-borne paints and varnishes. NOTE 2 Water-borne paints and varnishes can be tested using ISO 3679[3]. Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679. |
| Izdanje: | 2 |
| ICS: | 75.080 Naftni proizvodi općenito 75.100 Maziva, industrijska ulja i srodni proizvodi |
| Tehnički odbor/pododbor: | TO 28, Naftni proizvodi i maziva |
| Oznaka faze: | 60.60 - HRN dostupan |
| Glasilo (rasprava): | HZN e-Glasilo 4/2015 () |
| Glasilo (objava): | HZN e-Glasilo 4/2016 () |
| Način prihvaćanja: | pr - prihvaćanje strane norme u izvorniku |
| Cijena #1: | Cijena: 41,00 € | Jezik: en | Cjenovni razred: G | Broj stranica: 26 |
| Izvornik: | EN ISO 2719:2016 |
| Zamjenjuje: | HRN EN ISO 2719:2003 |
Obrazac za naručivanje normativnih dokumenata i/ili publikacija (obrazac ob.025-2):