HRN EN ISO 898-1:2005
Mehanička svojstva spojnih elemenata izrađenih od ugljičnih i legiranih čelika -- 1. dio: Vijci i svorni vijci (ISO 898-1:1999; EN ISO 898-1:1999)
| Oznaka: | HRN EN ISO 898-1:2005 |
| Naslov (HR): | Mehanička svojstva spojnih elemenata izrađenih od ugljičnih i legiranih čelika -- 1. dio: Vijci i svorni vijci (ISO 898-1:1999; EN ISO 898-1:1999) |
| Naslov (EN): | Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs (ISO 898-1:1999; EN ISO 898-1:1999) |
| Područje primjene (EN): | This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1). Properties will vary at higher and lower temperature. This part of ISO 898 applies to bolts, screws and studs - with nominal thread diameter [d ? 39 mm] (coarse and fine pitch); - with triangular ISO thread according to ISO 68; - with diameter/pitch combinations according to ISO 261 and ISO 262; - with thread tolerance according to ISO 965-1 and ISO 965-2; - of any shape; - made of carbon steel or alloy steel. It does not apply to set screws and similar threaded fasteners (see ISO 898-5). It does not specify requirements for such properties as - wedability; - corrosion-resistance (see ISO 3506); - ability to whistand temperatures above + 300 øC or below - 50 øC. NOTE : The designation system of this part of ISO 898 may be used for sizes outside the limits laid down in the clause (e.g. d > 39 mm), provided that all mechanical requirements of the property classes are met. |
| Izdanje: | 1 |
| ICS: | 21.060.10 Vijci i svorni vijci |
| Tehnički odbor/pododbor: | TO 544, Strojni elementi |
| Oznaka faze: | 95.99 - povlačenje HRN |
| Glasilo (rasprava): | Glasilo DZNM 1-2/2005 () |
| Glasilo (objava): | HZN Glasilo 1/2005 () |
| Glasilo (povlačenje): | 5/2009 () |
| Način prihvaćanja: | pr - prihvaćanje strane norme u izvorniku |
| Cijena #1: | Cijena: 41,00 € | Jezik: en | Cjenovni razred: G | Broj stranica: 31 |
| Izvornik: | EN ISO 898-1:1999 |
| Zamjenjena s: | HRN EN ISO 898-1:2009 |
Obrazac za naručivanje normativnih dokumenata i/ili publikacija (obrazac ob.025-2):